Thermally conductive potting adhesive has excellent fluidity and stability. It can be cured at room temperature or heated, and the higher the temperature, the faster it cures. It is mainly used for bonding, sealing, potting and coating of electronic components. Potting glue before curing belongs to the liquid state, with liquidity glue viscosity according to the product material, performance and production process and different, after curing can play a very good thermal conductivity, insulation, waterproof and moisture-proof, dustproof, confidential, anti-corrosion, temperature resistance, shockproof role.

Electronic potting adhesive use method.
One-component electronic potting adhesive, can be used directly, and can also be directly filled with a gun.
Two-component condensation type electronic potting adhesive, curing agent 2% ~ 3%, stirring - vacuum de-foaming - potting
Add molding electronic potting adhesive, curing agent 1:1, 10:1

• Encapsulation process flow.

•  (1.) Clean the surface.

•  (2.) Mixing: Mix the components.

•  (3.) Defoaming: Natural defoaming and vacuum defoaming.

•  (4.) Potting: The adhesive should be potted within the operation time, otherwise it will affect the leveling.

•  (5.) Curing: room temperature or heating curing can be done.

• Electronic potting adhesive application cases.

• Electronic potting adhesive is used for bonding, sealing, potting and coating of electronic components.

Electronic potting adhesive
Electronic potting adhesive industry status.
At present, the domestic power oil LED encapsulation silicone enterprises about 1500, but the main products are concentrated in the low-end market.
In the exchange rate, labor costs under the double attack, most of the organic silicon potting enterprise profits are increasingly thin, some even lose money to earn a shout.
Environmental protection requirements continue to improve, safety standards have become a domestic silicone export enterprises must cross a threshold, due to customers to improve the detection standards, this alone increased nearly 9% of the cost of testing enterprises.
The average monthly wages of industry employees generally rose, and labor costs rose nearly 30% compared to last year, accounting for about 50% of production costs, while profits slipped to about 5%.
Electronic potting adhesive industry development trend.
Electronic potting adhesive monomer small and medium-sized production capacity will not be able to enter the industry. According to national policy guidance, in the longer term, electronic potting adhesive will develop in the direction of scale and deep processing.
Silicone rubber high-end products gap is huge, silicone rubber is divided into two categories: high-temperature silicone rubber and room temperature silicone rubber. High-temperature silicone rubber is mainly used in the manufacture of various silicone rubber products, while room temperature silicone rubber is mainly used as a bonding adhesive, potting materials or molds.