Currently on the market a variety of thermally conductive materials, thermally conductive double-sided adhesive compared to other thermally conductive materials have a better bonding performance, so for the thermal conductivity requirements of the product is not high, thermally conductive double-sided adhesive is a good choice of thermal media, can effectively solve the problem of fixing electronic components, but if the installation is not good easily affect the performance of the use of thermally conductive double-sided adhesive. So for how to install you should learn:.

In the installation of the use of thermally conductive double-sided adhesive is strictly prohibited by hand or other non-adhesive contact with the surface, is strictly prohibited repeatedly uncovered, the bonded surface should be kept clean, dry, generally cleaned with alcohol before use, to avoid affecting the bonding firmness:.

Step 1: Wipe the surface of the device with a lint-free cotton cloth.

Step 2: Wipe the surface of the device with a cotton cloth soaked with industrial cleaner to remove oil and dirt, and do not touch the clean surface again during installation.

Step 3: Peel off the protective film on one side of the adhesive backing, and do not touch the adhesive surface with your fingers.

Step 4: Apply it to the surface of the device and press lightly for five seconds from the center of the bonding area to all sides to ensure that the double-sided adhesive tape is in full 100% contact with the surface of the heat sink part.

Step 5: Tear off the protective film on the other side of the adhesive backing in the same way as in steps 3 and 4, so that the double-sided tape is firmly attached to the chip.

Cushion is a professional manufacturer of thermal conductive materials, you can consult us if you encounter any problems with thermal conductive materials.